emqx_connector_mqtt_schema {

bridge_mode.desc:
"""If enable bridge mode.
NOTE: This setting is only for MQTT protocol version older than 5.0, and the remote MQTT
broker MUST support this feature.
If bridge_mode is set to true, the bridge will indicate to the remote broker that it is a bridge not an ordinary client.
This means that loop detection will be more effective and that retained messages will be propagated correctly."""

bridge_mode.label:
"""Bridge Mode"""

clean_start.desc:
"""Whether to start a clean session when reconnecting a remote broker for ingress bridge"""

clean_start.label:
"""Clean Session"""

clientid_prefix.desc:
"""Optional prefix to prepend to the clientid used by egress bridges."""

clientid_prefix.label:
"""Clientid Prefix"""

egress_desc.desc:
"""The egress config defines how this bridge forwards messages from the local broker to the remote broker.<br/>
Template with variables is allowed in 'remote.topic', 'local.qos', 'local.retain', 'local.payload'.<br/>
NOTE: if this bridge is used as the action of a rule, and also 'local.topic'
is configured, then both the data got from the rule and the MQTT messages that matches
'local.topic' will be forwarded."""

egress_desc.label:
"""Egress Configs"""

egress_local.desc:
"""The configs about receiving messages from local broker."""

egress_local.label:
"""Local Configs"""

egress_local_topic.desc:
"""The local topic to be forwarded to the remote broker"""

egress_local_topic.label:
"""Local Topic"""

egress_remote.desc:
"""The configs about sending message to the remote broker."""

egress_remote.label:
"""Remote Configs"""

egress_remote_qos.desc:
"""The QoS of the MQTT message to be sent.<br/>
Template with variables is allowed."""

egress_remote_qos.label:
"""Remote QoS"""

egress_remote_topic.desc:
"""Forward to which topic of the remote broker.<br/>
Template with variables is allowed."""

egress_remote_topic.label:
"""Remote Topic"""

ingress_desc.desc:
"""The ingress config defines how this bridge receive messages from the remote MQTT broker, and then
        send them to the local broker.<br/>
        Template with variables is allowed in 'remote.qos', 'local.topic', 'local.qos', 'local.retain', 'local.payload'.<br/>
        NOTE: if this bridge is used as the input of a rule, and also 'local.topic' is
        configured, then messages got from the remote broker will be sent to both the 'local.topic' and
        the rule."""

ingress_desc.label:
"""Ingress Configs"""

ingress_local.desc:
"""The configs about sending message to the local broker."""

ingress_local.label:
"""Local Configs"""

ingress_local_qos.desc:
"""The QoS of the MQTT message to be sent.<br/>
Template with variables is allowed."""

ingress_local_qos.label:
"""Local QoS"""

ingress_local_topic.desc:
"""Send messages to which topic of the local broker.<br/>
Template with variables is allowed."""

ingress_local_topic.label:
"""Local Topic"""

ingress_remote.desc:
"""The configs about subscribing to the remote broker."""

ingress_remote.label:
"""Remote Configs"""

ingress_remote_qos.desc:
"""The QoS level to be used when subscribing to the remote broker"""

ingress_remote_qos.label:
"""Remote QoS"""

ingress_remote_topic.desc:
"""Receive messages from which topic of the remote broker"""

ingress_remote_topic.label:
"""Remote Topic"""

max_inflight.desc:
"""Max inflight (sent, but un-acked) messages of the MQTT protocol"""

max_inflight.label:
"""Max Inflight Message"""

mode.desc:
"""The mode of the MQTT Bridge.<br/>
- cluster_shareload: create an MQTT connection on each node in the emqx cluster.<br/>
In 'cluster_shareload' mode, the incoming load from the remote broker is shared by
using shared subscription.<br/>
Note that the 'clientid' is suffixed by the node name, this is to avoid
clientid conflicts between different nodes. And we can only use shared subscription
topic filters for <code>remote.topic</code> of ingress connections."""

mode.label:
"""MQTT Bridge Mode"""

password.desc:
"""The password of the MQTT protocol"""

password.label:
"""Password"""

payload.desc:
"""The payload of the MQTT message to be sent.<br/>
Template with variables is allowed."""

payload.label:
"""Payload"""

proto_ver.desc:
"""The MQTT protocol version"""

proto_ver.label:
"""Protocol Version"""

retain.desc:
"""The 'retain' flag of the MQTT message to be sent.<br/>
Template with variables is allowed."""

retain.label:
"""Retain Flag"""

server.desc:
"""The host and port of the remote MQTT broker"""

server.label:
"""Broker IP And Port"""

server_configs.desc:
"""Configs related to the server."""

server_configs.label:
"""Server Configs"""

username.desc:
"""The username of the MQTT protocol"""

username.label:
"""Username"""

}