1b6a586948
feature(mqtt): support response information ( #3533 )
2020-06-20 15:07:37 +08:00
ac82ad12e3
Add log overload protection parameters
2020-05-28 21:18:32 +08:00
d49f4118fe
Mgmt emqx modules ( #3376 )
2020-04-10 19:55:21 +08:00
1790cde942
Get client's addr/port from proxy header if enable proxy_protocol
2020-04-10 19:40:10 +08:00
55a8b1b173
Support topic metrics ( #3341 )
...
Support topic metrics
2020-03-27 13:33:10 +08:00
9e6966110d
Move emqx_delay_publish here ( #3323 )
...
Move emqx_delay_publish here
2020-03-26 18:32:24 +08:00
2ab6ec418e
Add subscription option for proxy subscribing
2020-03-24 11:31:25 +08:00
1a1f348aca
Fix mountpoint data type error
2020-03-05 14:14:22 +08:00
3f6f0eca40
Add an option to allow client bypass auth plugins
2020-02-21 09:42:26 +08:00
d532b5f2e3
Remove the unused 'hibernate_after' config
2020-02-04 15:14:52 +08:00
36b3a443b7
Reduce default tcp client nums to schedulers/2
2020-01-17 17:00:55 +08:00
3ae3d8a40d
Tune and optimize the Erlang VM ( #3195 )
2020-01-17 09:58:34 +08:00
a318532bb0
Tuning the 'force_gc_policy' of MQTT connections ( #3192 )
...
Tuning the 'force_gc_policy' of MQTT connections
2020-01-17 09:42:16 +08:00
a71486cac7
Tuning the number of threads in async thread pool ( #3193 )
2020-01-17 09:32:01 +08:00
2b3003b323
Move the global GC server from 'emqx-recon' to 'emqx' project ( #3190 )
2020-01-16 23:45:17 +08:00
f6b2c9a69f
Correct timestamp for banned ( #3188 )
2020-01-16 23:11:19 +08:00
40ed0ce7ad
Defaults to disable force_shutdown_policy
2020-01-15 20:16:58 +08:00
0c3e863ac1
Enlarge performance args for internal zone ( #3154 )
2020-01-06 09:51:55 +08:00
bbcd2bffc5
Improve the session module ( #3082 )
...
Improve the session module
2019-12-07 15:54:02 +08:00
9c3273a2c6
Improve the process of handling MQTT control packets ( #3079 )
2019-12-06 19:51:06 +08:00
a540958846
Add mqtt.strict_mode configuration ( #3069 )
...
Add mqtt.strict_mode configuration
2019-12-04 10:54:52 +08:00
4c9dda105f
Add 'active_n' option for WebSocket listener
2019-11-01 08:00:11 +08:00
a0e72fd040
Breaking change of listener's rate_limit config
2019-10-18 18:52:57 +08:00
8c1e452b6e
Add 'hibernate_after' option for zone
2019-10-12 16:56:18 +08:00
d004a5b68e
Rename 'client_id' field to 'clientid'
2019-09-29 16:46:27 +08:00
0a1679b122
Implement a new flapping module ( #2884 )
2019-09-10 15:21:08 +08:00
91a8dbda56
Fix conflicts
2019-08-09 16:41:11 +08:00
ddc25be915
Rename node.proto_dist to cluster.proto_dist
2019-08-09 15:56:33 +08:00
4a70cf0e9f
Support ekka without epmd
2019-08-09 15:56:33 +08:00
bd061415c9
Rewrite the emqx_mqtt_caps module and add test cases
...
- Rename `mqtt_retain_available` to `retain_available`
- Rename `mqtt_wildcard_subscription` to `wildcard_subscription`
- Rename `mqtt_shared_subscription` to `shared_subscription`
- Add `emqx_zone:unset_env/2` API for unit test
2019-08-08 14:11:26 +08:00
20a7ed6f53
RPC batch
2019-07-29 09:35:06 +08:00
b0e2b7db0c
Support inter-node messages via RPC cast
2019-07-27 12:59:07 +08:00
b61d72cdcd
Add options for gen_rpc
2019-07-26 11:22:25 +08:00
01f8ce1dc7
Add default k8s.suffix
2019-07-19 18:03:53 +08:00
caf6dab808
Support K8S hostname auto discovery cluster
2019-07-19 18:03:53 +08:00
86333802b9
Add configuration for sys_heartbeat
2019-07-19 17:33:24 +08:00
96fff39535
Change default logger level to warning
2019-06-28 21:34:21 +08:00
9df6345a6c
Remove bridge functions from emqx ( #2652 )
...
* Remove bridge functions from emqx
2019-06-26 19:33:17 +08:00
c4de0b1792
No chars limit by default
2019-06-13 13:53:59 +08:00
0857b976ed
Better zone ( #2548 )
2019-05-25 22:29:23 +08:00
54f2a768a8
Rm start logger:set_primary_config
2019-05-23 10:51:21 +08:00
7e0ac5bd34
Fix bad config type of long_gc ( #2504 )
2019-05-08 10:19:49 +08:00
7b356e80f4
Rename varibles
2019-05-07 17:27:06 +08:00
a1eb7ca7d2
Adapt max-heap-size to Arch-32 systems
...
The erlang:process_flag(max_heap_size, MaxHeapSize) can only set a MaxHeapSize of `small integer`, which is smaller than 2^59 on 64-bit systems, and 2^27 on 32-bit systems.
2019-05-07 17:27:06 +08:00
0ea6697a57
Enlarge chars_limit to 8192
2019-05-05 21:28:59 +08:00
6dd09ef681
Optimize log configuration
2019-05-05 14:35:43 +08:00
eaa1deab20
Refactor flapping code ( #2476 )
...
* Refactor flapping code
2019-04-24 10:42:26 +08:00
a8d2497480
Truncate logs that is too long
2019-04-19 16:49:17 +08:00
bcbb4b68e9
Add flapping detect feature
2019-04-19 16:34:33 +08:00
8821cfcfc7
Fix typo round_robbin -> round_robin in emqx.schema
2019-04-17 10:24:48 +08:00
fee94525db
Add etcd client certificate configuration ( #2367 )
...
* Add etcd client certificate
2019-03-27 13:53:40 +08:00
2534b8dc64
Support to pass ws compressing options ( #2356 )
...
Add new config entries about websocket
2019-03-27 10:19:35 +08:00
a72a914fb8
Fix issue #2312 ( #2313 )
...
* Fix SSL option parser
* Fix bridge disconnect log formatting
* Set no headers if new headers is undefined
2019-03-16 19:28:57 +08:00
111b66121c
Support TLS/DTLS PSK ( #2297 )
...
* Improve filter functions for emqx-hook
* Add PSK hook
* Reset hook args for filter functions
2019-03-13 22:24:19 +08:00
48450d1d37
Move request response out of emqx client ( #2293 )
...
* Delete response_topic_prefix
The Response-Infomation in CONNACK was misinterpreated, it should
not be a broker's global config, instead, it should be per-client
or even per-session prefix/suffix mechanism
* Delete request-response code from emqx_client
* Add request-response test code
* meck as default dependency --- temp workaround for dep-vsn-check
2019-03-13 11:27:25 +08:00
076f3e3068
Fix schema bug
2019-03-13 10:14:31 +08:00
93162c52b6
Fix conf parse bug ( #2296 )
...
Prior to this change, there are some config entry which is not parsed
correctly. So if user modify config such as reconnect_interval for
bridge, the new config can not be taken into effect.
2019-03-11 16:31:21 +08:00
da755b88c7
Add monitors and alarm handler ( #2266 )
...
* Add monitors and alarm handler
2019-02-28 18:25:17 +08:00
7efd7b3ec0
Rename portal to bridge
2019-02-28 15:31:54 +08:00
d18f4ba550
Fix wrong config entries
2019-02-28 11:18:12 +08:00
796fc3b1ba
Fix app config generation ( #2245 )
2019-02-28 11:17:27 +08:00
086a1d56b9
Drop unused config schema
...
bridge.$name.transport was added before we decided to derive
transport portocol based on the 'address' config.
i.e. when it's a remote erlang node, use gen_rpc
otherwise (must be IP or hostnmae), we should estabilish mqtt connection
2019-02-28 11:17:27 +08:00
fbe67e6784
Introduce new bridge impl
2019-02-28 11:17:27 +08:00
a0fd9e63e0
Add data_dir to emqx.conf ( #2271 )
...
* Add data_dir to emqx.conf
2019-02-28 09:28:37 +08:00
44d3eff094
Auto-pull-request-by-2019-02-19 ( #2232 )
...
* Update Copyright to 2019 (#2191 )
* Disable bridges by default (#2189 )
* Fix warning logger args emqx#2195
* Ambiguity elimination (#2217 )
* Fix emqx_ws_connection: prevent crashes on pong (#2210 )
* Issue#2184 (#2194 )
* Delete dep-vsn-check
* Format app.src
2019-02-19 14:00:34 +08:00
de65e21270
Disable lager
...
This PR removes lager handlers and the `crash.log`, in case of some dependencies or plugins of emqx use lager.
2019-01-09 12:21:20 +08:00
981d785c06
Fix data type of mountpoint from string to binary
2019-01-09 10:31:38 +08:00
6a1ebe299a
Merge emqx32 to emqx30 ( #2112 )
2018-12-28 19:44:41 +08:00
7d3357e0f3
Merge emqx32
2018-12-21 16:01:32 +08:00
7d9e350bbe
Add option to disconnect client in case acl deny ( #2059 )
...
* Add option to disconnect client in case acl deny
2018-12-19 10:34:06 +08:00
c7fa4b1b15
Revert vm args in emqx conf b ( #2070 )
...
* Revert changes in emqx.conf for backward compatibility
2018-12-18 16:50:47 +08:00
721b72b96a
Add 'active_n' option to optimize the CPU usage of emqx_connection ( #2060 )
...
* Add 'active_n' option to optimize the CPU usage of emqx_connection
* Supports batch processing 'DOWN' events
2018-12-17 19:53:29 +08:00
68a6a88eb9
Move all vm args into separate file vm.args
2018-12-14 09:53:13 +08:00
d445c17e6c
Move some vm args to file vm.args
2018-12-14 09:53:13 +08:00
abe9aff062
Add 'enable_session_registry' config
2018-12-13 18:28:32 +08:00
ea62b15c87
Alter apis provided by emqx_metrics, and use existing timer to commit metrics
2018-11-30 17:44:29 +08:00
194dbc02c8
Add batch commit for metrics
2018-11-30 17:44:29 +08:00
76d5dedb3b
Remove simple log handler at startup ( #2000 )
...
The simple logger handler is not removed if we set the `log.to=file` in
emqx.conf.
This might be an issue of OTP logger:
https://bugs.erlang.org/browse/ERL-788
I set the error_logger to silent as a workaround.
2018-11-30 14:29:34 +08:00
6fa183f847
Add CLI for log level ( #1977 )
2018-11-23 11:04:33 +08:00
14b8036576
Use username replace id(issue#1737) ( #1961 )
...
* Use username replace id(issue#1737)
* Add test case for issue#1737
* Make with_connection/2 support batch connect
2018-11-21 22:51:33 +08:00
a2c658ba19
Add acking mechamism for shared dispatch ( #1872 )
...
* Add acking mechamism for shared dispatch
For QoS0 messages, no acking
For QoS1/2 messages, 'ACK' at any of events below:
- ACK when QoS is downgraded to 0
- Message is sent to connection process
'NACK' at any of events below:
- Message queue is full and the receiving session starts to drop old messages
- The receiving session crash
Upon 'NACK', messages are dispatched to the 'next' subscriber in the group,
depending on the shared subscription dispatch strategy.
2018-11-21 22:49:45 +08:00
16821490ce
Fix issue#1874 ( #1964 )
...
* Fix issue#1874
Prior to this change, if user use one client connect emqx with mqtt
v3.1.1, the client subscribe the topic and publish message to this
topic, it would receive this message itself published, this commit
provide a configure option to let user ignore the message itself published.
This change fix issue 1874.
* Small Fix
* Fix bug
* Better design
* Fix compile warning and improve coverage
* Better design to solve the performance issue
* Fix typo
* Fix typo
* Delete spaces in end of lines.
* Do not use anonymous function
* Better performance
2018-11-19 13:34:03 +08:00
2269967f1a
Lazy evaluation when logging messages
...
Formatting variables and then passing them into the logger functions leads
to performance issues. i.e.
```erlang
logger:debug("RECV ~s", [emqx_packet:format(Packet)])
```
Above message will only be printed when the current log level set to
`debug`, but the function emqx_packet:format/1 will always be evaluated no
matter what the current log level is.
OTP 21 provides a special meta-data named `report_cb`, which can be used
for lazy evaluation. The fun is only evaluated if the primary/handler log level
check passes, and is therefore recommended if it is expensive to generate
the message.
2018-11-19 11:17:58 +08:00
faeda253e1
Fix conflicts
2018-11-10 11:44:55 +08:00
997958aed1
Change the start_link API for emqx_client
...
Prior to this change, emqx_client:start_link does 2 works in one call:
- init an erlang process for emqx_client
- send MQTT CONNECT to remote broker
But this solution have some drawbacks:
- the return value of `start_link` compiles the return values of the 2
works: {ok, Pid, MqttResult}. It is inconsistent with the return value
of `gen_statem:start_link`, may causes confusions.
- the return mode of the 2 works are different:
`start_link` should always return {ok, Pid} or {error, Reason}, but
connecting to mqtt may throw out exceptions as it handles the
socket. But the caller couldn't have thought of the exception, he would
pattern match on the result of `emqx_client:start_link`, but it crashed!
- If the init work succeed but the connection failed, the caller couldn't
get a Pid from the return value, but indeed it was created inside the
emqx_client. This hides the fact that the Pid was created, and when the
Pid dies, the caller would receive an message from a Pid it doesn' know about.
This change divived these 2 work into 2 APIs:
- `start_link/1` is to build and verify the options, and returns {ok,Pid}
(on success) or {error, Reason} (on failure).
- `connect/1` is to send MQTT CONNECT, and returns {ok, MQTTResult::properties()} or
{error, MQTTReason}. MQTT reason codes will contains in the `MQTTReason`.
2018-11-09 17:43:04 +08:00
2dc8ec8b11
Bridge via TLS
2018-11-09 17:43:04 +08:00
cca27d1a5a
Change filesync_repeat_interval to no_repeat
2018-11-05 16:04:58 +08:00
92cc171aaf
Support tracing log files for specific topics or clients
2018-11-02 18:38:07 +08:00
94dbdffd59
New logger formatter with meta-data
2018-11-02 18:38:07 +08:00
2c63aef3f6
Update schema
2018-11-02 18:32:42 +08:00
ae743ad1f0
Rewrite emqx_mqueue.erl
...
Fixed bugs:
- Priority queue lack of a `len + 1` logic in `in/2`
Changed behaviors:
- Topics not found in priority table (from config) will be treated with default priority,
instead of hasing topic name to a priority number.
- Default priority is now configurable (it was always lower than all configured priorities)
- The dropped message due to reaching `max_len` is now returned from `in/2`,
so the queue owner (`in/2` caller) can perform autopsy on it
2018-10-27 14:21:53 +02:00
3f761cbe6a
Support use certifate as username
...
Prior to this change, you can just use CN or EN field from the client
certificate as username.
This change add a new option to allow user to use Certificate directly as
username.
2018-10-23 14:37:05 +08:00
4c40f75f4b
Request & Response (broker and client) ( #1819 )
...
Add request & response support for CONNECT & CONNACK
Prior to this change, there is no validate and specified process for
Request-Response-Information and Response-Information
Also added basic Request/Response functionality to emqx_client implementation
2018-10-18 19:21:05 +02:00
e3f2ae8db8
Change from customized total heap size check to set process flag
...
The `max_heap_size` process flag can be used to limit total
heap size of a process, and it gives much more detailed
crash log if the limit is hit.
2018-09-29 21:36:34 +08:00
1bc175e0ce
Add mountpoint config to zone configs
2018-09-28 18:53:52 +08:00
925e98a3e5
Merge pull request #1823 from emqx/add-shared-sub-strategy
...
Add new shared subscription dispatch strategy
2018-09-22 19:30:08 +08:00
b35d37c92d
Add new shared subscription dispatch strategy
...
'random' was already there before this change
Added two new strategies: 'sticky' and 'round_robin'
'sticky' is made default as it is the cheapest
2018-09-22 10:50:34 +02:00
5689ad3485
Fix issue #1847 .
...
Change the config of 'zone.$name.publish_limit'
2018-09-22 16:26:39 +08:00
8f35d13e17
Improve bridges design ( #1849 )
...
Improve the design of bridges
2018-09-22 16:19:28 +08:00
03f607c1b2
Fix issue#1833 and #1834 ( #1845 )
2018-09-22 16:10:24 +08:00
8653732bae
Revert "Calculate the 1.5 keep alive time exactly"
2018-09-22 14:52:31 +08:00
02ddcf37cd
Merge branch 'emqx30' into more-gc-enforcement-policies
2018-09-22 06:35:11 +08:00
3dfe4168cb
Change '0KB' to '0MB'
2018-09-22 06:24:41 +08:00
05a5ad0f8c
Use '0MB' to configure size of force_shutdown_policy
2018-09-22 06:14:43 +08:00
29787d8945
Use '0MB' to configure bytes of force_gc_policy
2018-09-22 06:08:53 +08:00
33f9e895ad
Merge branch 'emqx30' into more-gc-enforcement-policies
2018-09-22 05:52:41 +08:00
fbac9ce43e
Improve the foce_gc_policy config.
2018-09-22 05:42:38 +08:00
b61615323b
Move shutdown policy config to zone configs
2018-09-21 18:58:18 +02:00
6fca651a84
Add connection/session shutdown policy
...
The hibernation behaviour is also changed (implicitly) in this commit:
Prior to this change, connection/session always hibernates after
the stats timer expires regardless of messages in mailbox.
After this commit, connection/session process only goes to hibernate
when the timer expires AND there is nothing left in the mailbox to
process
2018-09-21 18:58:18 +02:00
f9f09f66dd
Add new shutdown-policy config schemas
2018-09-21 18:58:18 +02:00
721f237bc4
Rewrite emqx_gc.erl
...
The implementation prior to this commit supports
only one gc enforcement policy which is message count threshold.
The new implementation introduces 1 more: volume threshold based
2018-09-21 22:56:34 +08:00
073bf481c9
Calculate the 1.5 keep alive time exactly
2018-09-20 15:51:28 +08:00
e940c1c970
Rewrite emqx_gc.erl
...
The implementation prior to this commit supports
only one gc enforcement policy which is message count threshold.
The new implementation introduces 1 more: volume threshold based
2018-09-19 21:08:16 +02:00
5eb92e37cc
Remove check for MQTT path, and normalize code
2018-09-14 11:49:17 +08:00
6f536eaac4
Add customized mqtt path for websocket
2018-09-14 11:49:17 +08:00
88b3460715
Add feature for issue#1809
2018-09-14 11:49:17 +08:00
c7928235c3
Remove check for MQTT path, and normalize code
2018-09-14 11:29:38 +08:00
e33414aca1
Add customized mqtt path for websocket
2018-09-14 10:10:32 +08:00
d29069a50d
Add feature for issue#1809
2018-09-12 15:17:18 +08:00
3045ec10ab
Add banned feature
2018-08-31 14:04:26 +08:00
e6bed24bb3
Add server_keepalive config
2018-08-31 00:32:56 +08:00
bbb58dad68
Change the default value of 'zone.external.await_rel_timeout' to 300s
2018-08-30 21:02:14 +08:00
7b58718280
Add mqueue_type, mqueue_priorities options
2018-08-30 18:26:31 +08:00
18eee0f1b0
Fixed Conflicting files
2018-08-30 10:53:35 +08:00
53d7d0a9d4
Update the peer_cert_as_username conf desc
2018-08-30 10:35:20 +08:00
465963fec3
Merge branch 'emqx30' into emqx30-feng
2018-08-29 17:36:38 +08:00
8e11845f87
Remove ignore_loop_deliver option
2018-08-28 07:36:22 +08:00
2e4fb3f946
emqttd -> emqx
2018-08-27 13:58:08 +08:00
91eb79967c
Add syslog
2018-08-27 13:50:38 +08:00
9d29dd0e10
use config enable_acl_cache
2018-08-26 18:25:17 +08:00
8cd20744be
improve cache datastruct using keys-queue
2018-08-26 13:33:00 +08:00
a904031979
acl cache using proc_dict
2018-08-26 13:30:18 +08:00
68cfcf6e0e
Pass paho mqtt interoperability tests
2018-08-24 23:19:11 +08:00
694485252a
Merge branch 'emqx30-dev' of github.com:emqtt/emqttd into emqx30-dev
2018-08-24 18:43:36 +08:00
0f052ce352
Upgrade connection, protocol and session modules for MQTT 5.0
2018-08-24 18:39:59 +08:00
22e8b07a3d
Receive/send messages by bridge
2018-08-19 20:31:44 +08:00
f80cd2d986
Improve the MQTT over Websocket connection
2018-08-11 17:57:19 +08:00
bc8302dae9
Change default value of max_mqueue_len to 1000
2018-08-10 15:39:24 +08:00
d9004d4cfb
Add MQTT section in configuration file
2018-08-10 12:43:32 +08:00
3ac4be84e4
Remove 'listener.wss.external.handshake_timeout' for cowboy does not support this option
2018-08-09 14:26:39 +08:00
854132d0c3
Add max_conn_rate, handshake_timeout options for wss listeners
2018-08-09 09:13:30 +08:00
e23a6e87d8
Merge listeners, zones, bridges config
2018-08-08 19:37:57 +08:00
4cf1815030
Add more configurations for EMQ X R3.0
2018-08-08 19:23:32 +08:00
4d9e03a803
Refactor websocket conn using cowboy
2018-08-08 18:36:14 +08:00
7d0cba9427
Add MQTT 5.0 supports for connection, protocol and session modules
2018-08-06 16:33:10 +08:00
cbbc231210
Comment log.syslog.* to fix building issue
2018-07-19 10:08:37 +08:00
7ee54aac28
Add 'qos' field to message record
2018-07-18 23:41:00 +08:00
b3adcc8971
Add RPC Args
2018-07-18 14:24:35 +08:00
c79fa29587
Fix the schema of lager console backend
2018-03-30 17:17:18 +08:00
f4fd6efe16
Merge the emqx-common, emqx-router libraries
2018-02-26 23:29:53 +08:00
057ef7b668
Merge branch 'master'
2018-02-26 01:05:08 +08:00
fcb2ec8427
Merge the latest enterprise branch
2018-02-24 15:56:32 +08:00
b63c34ab14
Merge the latest master branch
2018-02-24 11:27:09 +08:00
2674c145a9
Fix the 'inet_ssl' distribution module
2018-02-16 20:40:44 +08:00
79902be40e
Fix issue #1492 - add 'node.ssl_dist_optfile' to support ssl distributation
2018-02-16 18:40:03 +08:00
bd0409879b
Add 'proxy_port_address', 'proxy_port_header' options for WebSocket listener
2018-01-28 15:26:56 +08:00
707d338b0e
Merge branch 'develop' into ws-proxy
2018-01-28 15:11:08 +08:00
f70bf23440
Add 'listener.<proto>.<name>.reuseaddr' option
2018-01-24 09:48:06 +08:00
87ae76b6b4
Fix issue #1460 - Add node.proto_dist option to support inet6_dist
2018-01-23 15:22:05 +08:00
a1cbdc5122
Update emq.conf and emq.schema
2018-01-12 10:46:35 +08:00
3a39706d84
Add more options for 'listener.wss.'
2018-01-04 16:05:44 +08:00
b2b78c178c
Add documenation for SSL configurations
2018-01-04 12:25:05 +08:00
bcec25092b
Merge version 2.3.2 to X edition
2017-12-26 21:09:24 +08:00
d5222dcc9b
Add proxy_protocol, proxy_protocol_timeout options for ws/wss
2017-12-25 20:38:09 +08:00
db954aeb6d
Support X.509 certificate based authentication with HAProxy
2017-12-15 19:23:50 +08:00
f1640f5b85
Merge emq24 to X branch
2017-12-07 11:02:44 +08:00
8e41aeeeb8
Add send_timeout, send_timeout_close options
2017-12-05 19:47:17 +08:00
bceb72853d
Fix issue #1335 - Forward real client IP using a reverse proxy for websocket
2017-12-02 17:59:29 +08:00
5006dbba6e
Add ws/wss proxy cofingurations for getting client original ip address
2017-12-01 22:12:27 +08:00
aaf19787af
Remove the duplicated InfoHandler
2017-11-22 18:11:21 +08:00
99ed0e46b6
Remove RPC args
2017-11-22 17:07:11 +08:00
2cec86eba7
Merge with version 2.3.0
2017-11-21 14:14:12 +08:00
c751e958db
Remove the translation for 'by_clientid'
2017-11-18 10:37:48 +08:00
1545e18cd9
Remove the 'mqtt.pubsub.by_clientid' option
2017-11-17 20:55:11 +08:00
97cf04d752
Add more lager configuration
2017-10-11 16:01:39 +08:00
989d2fd9e7
Add more lager configuration
2017-10-10 13:10:34 +08:00
4b8cd18f5d
Merge with EMQ X project
2017-10-09 19:43:06 +08:00
d3f52898ee
Add Hot configuration plugin
2017-09-05 16:52:07 +08:00
88f84a4a0c
Support to configure keepalive backoff
2017-08-07 18:27:16 +08:00
09b4f17065
Merge the configuration of ekka
2017-07-23 18:42:54 +08:00
041b9100ed
Merge configurations of ekka library
2017-07-21 12:52:26 +08:00
a23df7f16e
Support autocluster with IP Multicast
2017-07-18 18:39:02 +08:00
1ea630bc9e
Integrate with ekka library
2017-06-28 16:51:19 +08:00
e4ac8a56dd
Add 'cluster.cookie' configuration
2017-06-28 16:39:11 +08:00
0067090d6a
Merge pull request #1101 from emqtt/emq22
...
Version 2.2-rc.1
2017-06-13 22:21:16 +08:00
70507e893c
Update listener.api schema
2017-06-12 21:54:51 +08:00
6918a69a2b
Update listener.api configuration
2017-06-12 16:09:18 +08:00
1a8cc2e146
Add http to listen on port 8080 for the http REST API
2017-06-09 14:54:03 +08:00
fbe4ee4eed
Merge pull request #1062 from emqtt/emq22
...
Version 2.2-beta.2
2017-05-20 11:03:40 +08:00
414f156d4a
Add websocket_protocol_header config
2017-05-19 16:46:14 +08:00
3e1c69dff1
Add cli listeners start|stop
2017-05-18 16:35:49 +08:00
2d6104fbd9
Ctl use clique
2017-05-11 16:02:38 +08:00
f730d011c4
Merge pull request #1038 from emqtt/emq22
...
Merge emq22 to master
2017-05-04 22:29:43 +08:00
b839fdc275
Merge pull request #986 from emqtt/emq20
...
merge emq20 branch code
2017-04-10 12:40:26 +08:00
ca03a84968
Merge pull request #973 from emqtt/emq20
...
syslog default level error
2017-03-31 15:32:26 +08:00
3573156e8f
syslog default level error
2017-03-31 15:31:50 +08:00
a125236220
fix windows branch conflicts
2017-03-31 14:47:25 +08:00
d8d96c1c6e
fix windows branch conflicts
2017-03-31 14:44:13 +08:00
45ca461fd9
Add ignore self publish message
2017-03-30 14:41:29 +08:00
acedcbbfd4
syslog handlers emqttd
2017-03-30 11:49:19 +08:00
tigercl