fix: channel handling when resource not connected

apps/emqx_bridge/test/emqx_bridge_v2_SUITE.erl

@@ -259,7 +259,7 @@ t_send_message(_) ->
     receive
         <<"my_msg">> ->
             ok
-    after 1000 ->
+    after 10000 ->
         ct:fail("Failed to receive message")
     end,
     unregister(registered_process_name()),
@@ -302,6 +302,66 @@ t_send_message_unhealthy_channel(_) ->
     {ok, _} = emqx_bridge_v2:remove(bridge_type(), my_test_bridge),
     ok.
 
+t_send_message_unhealthy_connector(_) ->
+    ResponseETS = ets:new(response_ets, [public]),
+    ets:insert(ResponseETS, {on_start_value, conf}),
+    ets:insert(ResponseETS, {on_get_status_value, connecting}),
+    OnStartFun = wrap_fun(fun(Conf) ->
+        case ets:lookup_element(ResponseETS, on_start_value, 2) of
+            conf ->
+                {ok, Conf};
+            V ->
+                V
+        end
+    end),
+    OnGetStatusFun = wrap_fun(fun() ->
+        ets:lookup_element(ResponseETS, on_get_status_value, 2)
+    end),
+    ConConfig = emqx_utils_maps:deep_merge(con_config(), #{
+        <<"on_start_fun">> => OnStartFun,
+        <<"on_get_status_fun">> => OnGetStatusFun,
+        <<"resource_opts">> => #{<<"start_timeout">> => 100}
+    }),
+    ConName = ?FUNCTION_NAME,
+    {ok, _} = emqx_connector:create(con_type(), ConName, ConConfig),
+    BridgeConf = (bridge_config())#{
+        <<"connector">> => atom_to_binary(ConName)
+    },
+    {ok, _} = emqx_bridge_v2:create(bridge_type(), my_test_bridge, BridgeConf),
+    %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+    %% Test that sending does not work when the connector is unhealthy (connecting)
+    %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+    register(registered_process_name(), self()),
+    _ = emqx_bridge_v2:send_message(bridge_type(), my_test_bridge, <<"my_msg">>, #{timeout => 100}),
+    receive
+        Any ->
+            ct:pal("Received message: ~p", [Any]),
+            ct:fail("Should not get message here")
+    after 10 ->
+        ok
+    end,
+    %% We should have one alarm
+    1 = get_bridge_v2_alarm_cnt(),
+    %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+    %% Test that sending works again when the connector is healthy (connected)
+    %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+    ets:insert(ResponseETS, {on_get_status_value, connected}),
+
+    _ = emqx_bridge_v2:send_message(bridge_type(), my_test_bridge, <<"my_msg">>, #{timeout => 1000}),
+    receive
+        <<"my_msg">> ->
+            ok
+    after 1000 ->
+        ct:fail("Failed to receive message")
+    end,
+    %% The alarm should be gone at this point
+    0 = get_bridge_v2_alarm_cnt(),
+    unregister(registered_process_name()),
+    {ok, _} = emqx_bridge_v2:remove(bridge_type(), my_test_bridge),
+    {ok, _} = emqx_connector:remove(con_type(), ConName),
+    ets:delete(ResponseETS),
+    ok.
+
 t_unhealthy_channel_alarm(_) ->
     Conf = (bridge_config())#{
         <<"on_get_channel_status_fun">> =>

apps/emqx_bridge/test/emqx_bridge_v2_test_connector.erl

@@ -37,6 +37,12 @@ query_mode(_Config) ->
 callback_mode() ->
     always_sync.
 
+on_start(
+    _InstId,
+    #{on_start_fun := FunRef} = Conf
+) ->
+    Fun = emqx_bridge_v2_SUITE:unwrap_fun(FunRef),
+    Fun(Conf);
 on_start(_InstId, _Config) ->
     {ok, #{}}.
 
@@ -95,6 +101,12 @@ on_query_async(
 ) ->
     throw(not_implemented).
 
+on_get_status(
+    _InstId,
+    #{on_get_status_fun := FunRef}
+) ->
+    Fun = emqx_bridge_v2_SUITE:unwrap_fun(FunRef),
+    Fun();
 on_get_status(
     _InstId,
     _State

apps/emqx_bridge_kafka/src/emqx_bridge_kafka_impl_producer.erl

@@ -502,10 +502,10 @@ on_get_channel_status(
                             connected
                     catch
                         _ErrorType:Reason ->
-                            {connecting, Reason}
+                            {error, Reason}
                     end;
                 {error, Error} ->
-                    {connecting, Error}
+                    {error, Error}
             end;
         {error, _Reason} ->
             connecting

apps/emqx_resource/src/emqx_resource.erl

@@ -200,8 +200,8 @@
     | {resource_status(), resource_state(), term()}.
 
 -callback on_get_channel_status(resource_id(), channel_id(), resource_state()) ->
-    resource_status()
-    | {resource_status(), term()}.
+    channel_status()
+    | {error, term()}.
 
 -callback query_mode(Config :: term()) -> query_mode().
 
@@ -525,7 +525,6 @@ call_health_check(ResId, Mod, ResourceState) ->
 
 -spec call_channel_health_check(resource_id(), channel_id(), module(), resource_state()) ->
     channel_status()
-    | {channel_status(), term()}
     | {error, term()}.
 call_channel_health_check(ResId, ChannelId, Mod, ResourceState) ->
     ?SAFE_CALL(Mod:on_get_channel_status(ResId, ChannelId, ResourceState)).

apps/emqx_resource/src/emqx_resource_manager.erl

@@ -430,6 +430,14 @@ handle_event(enter, _OldState, connected = State, Data) ->
     {keep_state_and_data, health_check_actions(Data)};
 handle_event(state_timeout, health_check, connected, Data) ->
     handle_connected_health_check(Data);
+handle_event(
+    {call, From}, {add_channel, ChannelId, Config}, connected = _State, Data
+) ->
+    handle_add_channel(From, Data, ChannelId, Config);
+handle_event(
+    {call, From}, {remove_channel, ChannelId}, connected = _State, Data
+) ->
+    handle_remove_channel(From, ChannelId, Data);
 %% State: DISCONNECTED
 handle_event(enter, _OldState, disconnected = State, Data) ->
     ok = log_state_consistency(State, Data),
@@ -443,15 +451,15 @@ handle_event(state_timeout, auto_retry, disconnected, Data) ->
 handle_event(enter, _OldState, stopped = State, Data) ->
     ok = log_state_consistency(State, Data),
     {keep_state_and_data, []};
-%% The following events can be handled in any state
+%% The following events can be handled in any other state
 handle_event(
-    {call, From}, {add_channel, ChannelId, Config}, _State, Data
+    {call, From}, {add_channel, ChannelId, _Config}, State, Data
 ) ->
-    handle_add_channel(From, Data, ChannelId, Config);
+    handle_not_connected_add_channel(From, ChannelId, State, Data);
 handle_event(
     {call, From}, {remove_channel, ChannelId}, _State, Data
 ) ->
-    handle_remove_channel(From, ChannelId, Data);
+    handle_not_connected_remove_channel(From, ChannelId, Data);
 handle_event(
     {call, From}, get_channels, _State, Data
 ) ->
@@ -545,11 +553,13 @@ start_resource(Data, From) ->
                 reason => Reason
             }),
             _ = maybe_alarm(disconnected, Data#data.id, Err, Data#data.error),
+            %% Add channels and raise alarms
+            NewData1 = channels_health_check(disconnected, add_channels(Data)),
             %% Keep track of the error reason why the connection did not work
             %% so that the Reason can be returned when the verification call is made.
-            UpdatedData = Data#data{status = disconnected, error = Err},
-            Actions = maybe_reply(retry_actions(UpdatedData), From, Err),
-            {next_state, disconnected, update_state(UpdatedData, Data), Actions}
+            NewData2 = NewData1#data{status = disconnected, error = Err},
+            Actions = maybe_reply(retry_actions(NewData2), From, Err),
+            {next_state, disconnected, update_state(NewData2, Data), Actions}
     end.
 
 add_channels(Data) ->
@@ -612,10 +622,10 @@ stop_resource(#data{state = ResState, id = ResId} = Data) ->
     %% The callback mod should make sure the resource is stopped after on_stop/2
     %% is returned.
     HasAllocatedResources = emqx_resource:has_allocated_resources(ResId),
-    case ResState =/= undefined orelse HasAllocatedResources of
-        true ->
     %% Before stop is called we remove all the channels from the resource
     NewData = remove_channels(Data),
+    case ResState =/= undefined orelse HasAllocatedResources of
+        true ->
             %% we clear the allocated resources after stop is successful
             emqx_resource:call_stop(NewData#data.id, NewData#data.mod, ResState);
         false ->
@@ -623,7 +633,7 @@ stop_resource(#data{state = ResState, id = ResId} = Data) ->
     end,
     _ = maybe_clear_alarm(ResId),
     ok = emqx_metrics_worker:reset_metrics(?RES_METRICS, ResId),
-    Data#data{status = stopped}.
+    NewData#data{status = stopped}.
 
 remove_channels(Data) ->
     Channels = maps:keys(Data#data.added_channels),
@@ -641,9 +651,7 @@ remove_channels_in_list([ChannelID | Rest], Data, KeepInChannelMap) ->
                 maybe_clear_alarm(ChannelID),
                 maps:remove(ChannelID, AddedChannelsMap)
         end,
-    case
-        emqx_resource:call_remove_channel(Data#data.id, Data#data.mod, Data#data.state, ChannelID)
-    of
+    case safe_call_remove_channel(Data#data.id, Data#data.mod, Data#data.state, ChannelID) of
         {ok, NewState} ->
             NewData = Data#data{
                 state = NewState,
@@ -663,6 +671,11 @@ remove_channels_in_list([ChannelID | Rest], Data, KeepInChannelMap) ->
             remove_channels_in_list(Rest, NewData, KeepInChannelMap)
     end.
 
+safe_call_remove_channel(_ResId, _Mod, undefined = State, _ChannelID) ->
+    {ok, State};
+safe_call_remove_channel(ResId, Mod, State, ChannelID) ->
+    emqx_resource:call_remove_channel(ResId, Mod, State, ChannelID).
+
 make_test_id() ->
     RandId = iolist_to_binary(emqx_utils:gen_id(16)),
     <<?TEST_ID_PREFIX, RandId/binary>>.
@@ -710,8 +723,20 @@ add_channel_need_insert_update_data(Data, ChannelId, ChannelConfig) ->
             update_state(UpdatedData, Data)
     end.
 
+handle_not_connected_add_channel(From, ChannelId, State, Data) ->
+    %% When state is not connected the channel will be added to the channels
+    %% map but nothing else will happen.
+    Channels = Data#data.added_channels,
+    NewChannels = maps:put(ChannelId, {error, resource_not_operational}, Channels),
+    NewData1 = Data#data{added_channels = NewChannels},
+    %% Do channel health check to trigger alarm
+    NewData2 = channels_health_check(State, NewData1),
+    {keep_state, update_state(NewData2, Data), [{reply, From, ok}]}.
+
 handle_remove_channel(From, ChannelId, Data) ->
     Channels = Data#data.added_channels,
+    %% Deactivate alarm
+    _ = maybe_clear_alarm(ChannelId),
     case maps:get(ChannelId, Channels, {error, not_added}) of
         {error, _} ->
             %% The channel is already not installed in the connector state.
@@ -721,8 +746,6 @@ handle_remove_channel(From, ChannelId, Data) ->
             NewData = Data#data{
                 added_channels = NewAddedChannels
             },
-            %% Deactivate alarm
-            _ = maybe_clear_alarm(ChannelId),
             {keep_state, NewData, [{reply, From, ok}]};
         _ ->
             %% The channel is installed in the connector state
@@ -754,6 +777,15 @@ handle_remove_channel_exists(From, ChannelId, Data) ->
             {keep_state_and_data, [{reply, From, Error}]}
     end.
 
+handle_not_connected_remove_channel(From, ChannelId, Data) ->
+    %% When state is not connected the channel will be removed from the channels
+    %% map but nothing else will happen.
+    Channels = Data#data.added_channels,
+    NewChannels = maps:remove(ChannelId, Channels),
+    NewData = Data#data{added_channels = NewChannels},
+    _ = maybe_clear_alarm(ChannelId),
+    {keep_state, update_state(NewData, Data), [{reply, From, ok}]}.
+
 handle_manually_health_check(From, Data) ->
     with_health_check(
         Data,