diff --git a/apps/emqx/i18n/emqx_limiter_i18n.conf b/apps/emqx/i18n/emqx_limiter_i18n.conf
new file mode 100644
index 000000000..ad7ae11aa
--- /dev/null
+++ b/apps/emqx/i18n/emqx_limiter_i18n.conf
@@ -0,0 +1,196 @@
+emqx_limiter_schema {
+
+  failure_strategy {
+    desc {
+      en: """The strategy when all the retries failed."""
+      zh: """当所有的重试都失败后的处理策略"""
+    }
+    label: {
+      en: """Failure Strategy"""
+      zh: """失败策略"""
+    }
+  }
+
+  max_retry_time {
+    desc {
+      en: """The maximum retry time when acquire failed."""
+      zh: """申请失败后，尝试重新申请的时长最大值"""
+    }
+    label: {
+      en: """Max Retry Time"""
+      zh: """最大重试时间"""
+    }
+  }
+
+  divisible {
+    desc {
+      en: """Is it possible to split the number of requested tokens?"""
+      zh: """申请的令牌数是否可以被分割"""
+    }
+    label: {
+      en: """Divisible"""
+      zh: """是否可分割"""
+    }
+  }
+
+  client_bucket_capacity {
+    desc {
+      en: """The capacity of per user."""
+      zh: """每个使用者的令牌容量上限"""
+    }
+    label: {
+      en: """Capacity"""
+      zh: """容量"""
+    }
+  }
+
+  capacity {
+    desc {
+      en: """The capacity of this token bucket."""
+      zh: """该令牌桶的容量"""
+    }
+    label: {
+      en: """Capacity"""
+      zh: """容量"""
+    }
+  }
+
+  low_water_mark {
+    desc {
+      en: """If the remaining tokens are lower than this value,
+the check/consume will succeed, but it will be forced to wait for a short period of time."""
+      zh: """当桶中剩余的令牌数低于这个值，即使令牌申请成功了，也会被强制暂停一会儿"""
+    }
+    label: {
+      en: """Low Water Mark"""
+      zh: """低水位线"""
+    }
+  }
+
+  initial {
+    desc {
+      en: """The initial number of tokens for this bucket."""
+      zh: """桶中的初始令牌数"""
+    }
+    label: {
+      en: """Initial"""
+      zh: """初始令牌数"""
+    }
+  }
+
+  rate {
+    desc {
+      en: """Rate for this bucket."""
+      zh: """桶的令牌生成速率"""
+    }
+    label: {
+      en: """Rate"""
+      zh: """速率"""
+    }
+  }
+
+  per_client {
+    desc {
+      en: """The rate limit for each user of the bucket, this field is not required"""
+      zh: """对桶的每个使用者的速率控制设置，这个不是必须的"""
+    }
+    label: {
+      en: """Per Client"""
+      zh: """每个使用者的限制"""
+    }
+  }
+
+  bucket_cfg {
+    desc {
+      en: """Bucket Configs"""
+      zh: """桶的配置"""
+    }
+    label: {
+      en: """Buckets"""
+      zh: """桶的配置"""
+    }
+  }
+
+  burst {
+    desc {
+      en: """The burst, This value is based on rate.<br/>
+ This value + rate = the maximum limit that can be achieved when limiter burst."""
+      zh: """突发速率。
+突发速率允许短时间内速率超过设置的速率值，突发速率 + 速率 = 当前桶能达到的最大速率值"""
+    }
+    label: {
+      en: """Burst"""
+      zh: """突发速率"""
+    }
+  }
+
+  batch {
+    desc {
+      en: """The batch limiter.
+This is used for EMQX internal batch operation
+e.g. limite the retainer's deliver rate"""
+      zh: """批量操作速率控制器。
+这是给 EMQX 内部的批量操作使用的，比如用来控制保留消息的派发速率"""
+    }
+    label: {
+      en: """Batch"""
+      zh: """批量操作"""
+    }
+  }
+
+  message_routing {
+    desc {
+      en: """The message routing limiter.
+This is used to limite the deliver rate for this EMQX node.
+If the this limiter limit is reached, new publish will be refused"""
+      zh: """消息派发速率控制器。
+这个用来控制当前节点内的消息派发速率，当达到最大速率后，新的推送将会被拒绝"""
+    }
+    label: {
+      en: """Message Routing"""
+      zh: """消息派发"""
+    }
+  }
+
+  connection {
+    desc {
+      en: """The connection limiter.
+This is used to limit the connection rate for this EMQX node.
+If the this limiter limit is reached, new connections will be refused"""
+      zh: """连接速率控制器。
+这个用来控制当前节点上的连接速率，当达到最大速率后，新的连接将会被拒绝"""
+    }
+    label: {
+      en: """Connection"""
+      zh: """连接速率"""
+    }
+  }
+
+  message_in {
+    desc {
+      en: """The message in limiter.
+This is used to limit the inbound message numbers for this EMQX node
+If the this limiter limit is reached, the restricted client will be slow down even be hung for a while."""
+      zh: """流入速率控制器。
+这个用来控制当前节点上的消息流入速率，当达到最大速率后，会话将会被限速甚至被强制挂起一小段时间"""
+    }
+    label: {
+      en: """Message In"""
+      zh: """消息流入速率"""
+    }
+  }
+
+  bytes_in {
+    desc {
+      en: """The bytes_in limiter.
+This is used to limit the inbound bytes rate for this EMQX node.
+If the this limiter limit is reached, the restricted client will be slow down even be hung for a while."""
+      zh: """流入字节率控制器.
+这个是用来控制当前节点上的数据流入的字节率，每条消息将会消耗和其二进制大小等量的令牌，当达到最大速率后，会话将会被限速甚至被强制挂起一小段时间"""
+    }
+    label: {
+      en: """Bytes In"""
+      zh: """流入字节率"""
+    }
+  }
+}
diff --git a/apps/emqx/src/emqx_limiter/src/emqx_limiter_schema.erl b/apps/emqx/src/emqx_limiter/src/emqx_limiter_schema.erl
index cebee0165..0ace62ac0 100644
--- a/apps/emqx/src/emqx_limiter/src/emqx_limiter_schema.erl
+++ b/apps/emqx/src/emqx_limiter/src/emqx_limiter_schema.erl
@@ -17,6 +17,7 @@
 -module(emqx_limiter_schema).
 
 -include_lib("typerefl/include/types.hrl").
+-include_lib("hocon/include/hoconsc.hrl").
 
 -export([
     roots/0,
@@ -84,110 +85,43 @@ roots() -> [limiter].
 
 fields(limiter) ->
     [
-        {bytes_in,
-            sc(
-                ref(limiter_opts),
-                #{
-                    description =>
-                        <<
-                            "The bytes_in limiter.<br>"
-                            "It is used to limit the inbound bytes rate for this EMQX node."
-                            "If the this limiter limit is reached,"
-                            "the restricted client will be slow down even be hung for a while."
-                        >>
-                }
-            )},
-        {message_in,
-            sc(
-                ref(limiter_opts),
-                #{
-                    description =>
-                        <<
-                            "The message_in limiter.<br>"
-                            "This is used to limit the inbound message numbers for this EMQX node"
-                            "If the this limiter limit is reached,"
-                            "the restricted client will be slow down even be hung for a while."
-                        >>
-                }
-            )},
-        {connection,
-            sc(
-                ref(limiter_opts),
-                #{
-                    description =>
-                        <<
-                            "The connection limiter.<br>"
-                            "This is used to limit the connection rate for this EMQX node"
-                            "If the this limiter limit is reached,"
-                            "New connections will be refused"
-                        >>
-                }
-            )},
-        {message_routing,
-            sc(
-                ref(limiter_opts),
-                #{
-                    description =>
-                        <<
-                            "The message_routing limiter.<br>"
-                            "This is used to limite the deliver rate for this EMQX node"
-                            "If the this limiter limit is reached,"
-                            "New publish will be refused"
-                        >>
-                }
-            )},
-        {batch,
-            sc(
-                ref(limiter_opts),
-                #{
-                    description => <<
-                        "The batch limiter.<br>"
-                        "This is used for EMQX internal batch operation"
-                        "e.g. limite the retainer's deliver rate"
-                    >>
-                }
-            )}
+        {bytes_in, sc(ref(limiter_opts), #{desc => ?DESC(bytes_in)})},
+        {message_in, sc(ref(limiter_opts), #{description => ?DESC(message_in)})},
+        {connection, sc(ref(limiter_opts), #{desc => ?DESC(connection)})},
+        {message_routing, sc(ref(limiter_opts), #{desc => ?DESC(message_routing)})},
+        {batch, sc(ref(limiter_opts), #{desc => ?DESC(batch)})}
     ];
 fields(limiter_opts) ->
     [
-        {rate, sc(rate(), #{default => "infinity", desc => "The rate"})},
+        {rate, sc(rate(), #{default => "infinity", desc => ?DESC(rate)})},
         {burst,
             sc(
                 burst_rate(),
                 #{
                     default => "0/0s",
-                    desc =>
-                        "The burst, This value is based on rate.<br/>\n"
-                        " This value + rate = the maximum limit that can be achieved when limiter burst."
+                    desc => ?DESC(burst)
                 }
             )},
-        {bucket, sc(map("bucket_name", ref(bucket_opts)), #{desc => "Buckets config"})}
+        {bucket, sc(map("bucket_name", ref(bucket_opts)), #{desc => ?DESC(bucket_cfg)})}
     ];
 fields(bucket_opts) ->
     [
-        {rate, sc(rate(), #{desc => "Rate for this bucket."})},
-        {capacity, sc(capacity(), #{desc => "The maximum number of tokens for this bucket."})},
-        {initial,
-            sc(initial(), #{
-                default => "0",
-                desc => "The initial number of tokens for this bucket."
-            })},
+        {rate, sc(rate(), #{desc => ?DESC(rate)})},
+        {capacity, sc(capacity(), #{desc => ?DESC(capacity)})},
+        {initial, sc(initial(), #{default => "0", desc => ?DESC(initial)})},
         {per_client,
             sc(
                 ref(client_bucket),
                 #{
                     default => #{},
-                    desc =>
-                        "The rate limit for each user of the bucket,"
-                        " this field is not required"
+                    desc => ?DESC(per_client)
                 }
             )}
     ];
 fields(client_bucket) ->
     [
-        {rate, sc(rate(), #{default => "infinity", desc => "Rate for this bucket."})},
-        {initial,
-            sc(initial(), #{default => "0", desc => "The initial number of tokens for this bucket."})},
+        {rate, sc(rate(), #{default => "infinity", desc => ?DESC(rate)})},
+        {initial, sc(initial(), #{default => "0", desc => ?DESC(initial)})},
         %% low_water_mark add for emqx_channel and emqx_session
         %% both modules consume first and then check
         %% so we need to use this value to prevent excessive consumption
@@ -196,22 +130,20 @@ fields(client_bucket) ->
             sc(
                 initial(),
                 #{
-                    desc =>
-                        "If the remaining tokens are lower than this value,\n"
-                        "the check/consume will succeed, but it will be forced to wait for a short period of time.",
+                    desc => ?DESC(low_water_mark),
                     default => "0"
                 }
             )},
         {capacity,
             sc(capacity(), #{
-                desc => "The capacity of the token bucket.",
+                desc => ?DESC(client_bucket_capacity),
                 default => "infinity"
             })},
         {divisible,
             sc(
                 boolean(),
                 #{
-                    desc => "Is it possible to split the number of requested tokens?",
+                    desc => ?DESC(divisible),
                     default => false
                 }
             )},
@@ -219,7 +151,7 @@ fields(client_bucket) ->
             sc(
                 emqx_schema:duration(),
                 #{
-                    desc => "The maximum retry time when acquire failed.",
+                    desc => ?DESC(max_retry_time),
                     default => "10s"
                 }
             )},
@@ -227,7 +159,7 @@ fields(client_bucket) ->
             sc(
                 failure_strategy(),
                 #{
-                    desc => "The strategy when all the retries failed.",
+                    desc => ?DESC(failure_strategy),
                     default => force
                 }
             )}