bridge

docs/source/bridge.rst

@@ -1,27 +1,98 @@
 
 .. _bridge::
 
+============
+Bridge Guide
+============
 
-====================
+-------------
-Bridge
+emqttd Bridge
-====================
+-------------
 
+Two or more emqttd brokers could be bridged together. Bridge forward PUBLISH message from one broker node to another::
 
--------------------
-emqttd Node Bridge
--------------------
-
-::
                   ---------                     ---------                     ---------
     Publisher --> | node1 | --Bridge Forward--> | node2 | --Bridge Forward--> | node3 | --> Subscriber
                   ---------                     ---------                     ---------
 
+Configure Bridge
+----------------
+
+We create two emqttd brokers on localhost, for example:
+
++---------+---------------------+----------+
+| Name    | Node                | MQTT Port |
++---------+---------------------+----------+
+| emqttd1 | emqttd1@127.0.0.1   | 1883     |
++---------+---------------------+----------+
+| emqttd2 | emqttd2@127.0.0.1   | 2883     |
++---------+---------------------+----------+
+
+And then create a bridge that forwards all the 'sensor/#' messages from emqttd1 to emqttd2.
+
+1. Start Brokers
+................
+
+.. code:: console
+
+    cd emqttd1/ && ./bin/emqttd start
+    cd emqttd2/ && ./bin/emqttd start
+
+2. Create bridge: emqttd1--sensor/#-->emqttd2
+.............................................
+
+.. code:: console
+
+    $ cd emqttd1 && ./bin/emqttd_ctl bridges start emqttd2@127.0.0.1 sensor/#
+
+    bridge is started.
+    
+    $ ./bin/emqttd_ctl bridges list
+
+    bridge: emqttd1@127.0.0.1--sensor/#-->emqttd2@127.0.0.1
+
+3. Test the bridge
+...................
+
+.. code:: console
+
+    #emqttd2
+    mosquitto_sub -t sensor/# -p 2883 -d
+
+    #emqttd1
+    mosquitto_pub -t sensor/1/temperature -m "37.5" -d 
+
+4. Delete the bridge
+.....................
+
+.. code:: console
+
+    ./bin/emqttd_ctl bridges stop emqttd2@127.0.0.1 sensor/#
+
+------------------
+emqttd Bridge CLI
+-----------------
+
+.. code:: console
+
+    #query bridges
+    ./bin/emqttd_ctl bridges list
+
+    #start bridge                       
+    ./bin/emqttd_ctl bridges start <Node> <Topic>
+
+    #start bridge with options
+    ./bin/emqttd_ctl bridges start <Node> <Topic> <Options>
+
+    #stop bridge  
+    ./bin/emqttd_ctl bridges stop <Node> <Topic>
 
 -----------------
 mosquitto Bridge
 -----------------
 
-::
+Bridge mosquitto to emqttd broker::
+
                  -------------             -----------------
     Sensor ----> | mosquitto | --Bridge--> |               |
                  -------------             |    emqttd     |
@@ -29,19 +100,29 @@ mosquitto Bridge
     Sensor ----> | mosquitto | --Bridge--> |               |
                  -------------             -----------------
 
-
 mosquitto.conf
 --------------
 
+Suppose that we start an emqttd broker on localost:2883, and mosquitto on localhost:1883.
+
+A bridge configured in mosquitto.conf::
+
+    connection emqttd
+    address 127.0.0.1:2883
+    topic sensor/# out 2
+
+    # Set the version of the MQTT protocol to use with for this bridge. Can be one
+    # of mqttv31 or mqttv311. Defaults to mqttv31.
+    bridge_protocol_version mqttv311
 
 -------------
 rsmb Bridge
 -------------
 
-broker.cfg
+Bridge a RSMB to emqttd broker, same settings as mosquitto.
-----------
+
+broker.cfg::
 
-::
     connection emqttd
     addresses 127.0.0.1:2883
     topic sensor/#